Type at least three characters to start auto complete. Recently searched locations will be displayed if there is no search query. The first option will be automatically selected. Use up and down arrows to change selection. Use escape to clear.

Thermocol could be a material of the future for the construction of earthquake-resistant buildings even in the most seismic zone with thermal insulation and could also save the energy required to develop construction materials, scientists said.

Researchers at the Indian Institute of Technology, Roorkee (IITR), have found that thermocol or Expanded Polystyrene (EPS) could resist earthquake forces on up to four-storey buildings.

The researchers tested a full-scale building and several wall elements constructed with thermocol sandwiched between two layers of concrete at the National Seismic Test Facility (NSTF) of the Department of Earthquake Engineering, IIT Roorkee.

This was developed under the Fund for Improvement of S&T Infrastructure (FIST) programme of the Department of Science & Technology (DST), Government of India, a release from the Ministry of Science and Technology said on Monday.

Adil Ahmad, the research scholar who conducted the tests, evaluated the behaviour of the constructions under lateral forces, as earthquake causes force predominantly in a lateral direction.

The project was supplemented with a detailed computer simulation of a realistic four-storey building. Supervising the research, Yogendra Singh, a professor at IITR, informed that the analysis shows that a four-storey building constructed with this technique can resist earthquake forces, even in the most seismic zone of the country, without any additional structural support.

The researchers have attributed this earthquake resistance capability to the fact that the EPS layer is sandwiched between two layers of concrete, having reinforcement in the form of welded wire mesh.

The researchers said that the force being applied to buildings during an earthquake arises due to the inertia effect and depends on the mass of the building. Thermocol resists earthquakes by reducing the mass of the building.

In this technique, the EPS core and the wire mesh reinforcement is produced in a factory. The building skeleton is first erected from the factory-made core and reinforcement panels, and then concrete is sprayed on the skeleton core. This technique does not require any shuttering and hence can be constructed very fast, the researchers said.

Besides resisting earthquakes, the use of expanded polystyrene core in concrete walls of a building can result in thermal comfort. The core provides the necessary insulation against the heat transfer between the building's interior and exterior environment.

This can help in keeping the building interiors cool in hot environments and warm during cold conditions. India suffers a significant variation of temperature in different parts of the country and during different seasons. Therefore, thermal comfort is a crucial consideration along with structural safety.

"The technology also has the potential of saving construction material and energy, with an overall reduction in the carbon footprint of buildings. It replaces a large portion of concrete volume from the walls and floor/roof.

This replacement of concrete with the extremely lightweight EPS reduces mass, thereby decreasing the earthquake force acting on a building and diminishes the burden on the natural resources and energy required to produce the cement concrete, the release added.

The above article has been published from a wire agency with minimal modifications to the headline and text.

We recognise our responsibility to use data and technology for good. Take control of your data.

© Copyright TWC Product and Technology LLC 2014, 2022